Starlink Mini mount for a Rhino-Rack Vortex bars
Yes, the Fan-Cooled Rooftop Power Hub mounts on a Rhino-Rack Vortex bars. Mount the Power Hub on Rhino-Rack Vortex aero bars with M6 T-head bolts.
How it mounts
Vortex bars have a narrow slot along the top. The M6 T-Bolt Kit has stainless T-head bolts that slide into that slot, with nylon washers and nyloc nuts that tighten from inside the hub.
Slide the bolts to the spacing of the hub's slots, lower the hub over them, then fit the washers and nuts.
The Power Hub's flat base is 334.5 x 260 mm, with two rows of five M8 slots to bolt through. The Starlink Mini sits inside the locked, fan-cooled housing.
Fitting it yourself is very doable. If you would rather have a professional job, or you are short on time, a Kettle Trusted Installer can fit the mount and the 12V wiring for you.
Common questions
Does the Starlink Mini Power Hub fit Rhino-Rack Vortex bars?
Yes. Use the M6 T-Bolt Kit: the T-head bolts slide into the bar slot and the hub bolts down over them.
