Starlink Mini mount for a Rhino-Rack RLBS mesh basket
We will get the Fan-Cooled Rooftop Power Hub mounted on your Rhino-Rack RLBS mesh basket. The Power Hub fits a Rhino-Rack RLBS mesh basket using a simple sandwich plate set under the mesh.
How it mounts
A mesh basket has no channel to put a nut in, so we mount the hub with sandwich plates. Two plates sit on top of the mesh and two sit underneath it. The hub bolts through the mesh into the plates and clamps the basket floor between them.
The plates are 3 mm aluminium, cut and folded in our Victorian workshop. It is a straightforward install, and one of our Kettle Trusted Installers can do it for you if you would rather not.
The Power Hub's flat base is 334.5 x 260 mm, with two rows of five M8 slots to bolt through. The Starlink Mini sits inside the locked, fan-cooled housing.
The sandwich plate answer
Two aluminium plates go on top of the mesh and two go underneath. The Power Hub bolts down through the mesh into the plates, and the mesh floor is clamped between them. Nothing is cut or welded. Tell us at checkout or by email that you want the sandwich plates and we will add them to your order.
Want it confirmed before you order? Send us a photo of your rack and where you want the mount, and we will name the exact parts and have an order ready for you to pay. Send us a photo.
Fitting it yourself is very doable. If you would rather have a professional job, or you are short on time, a Kettle Trusted Installer can fit the mount and the 12V wiring for you.
Common questions
Will the Starlink Mini Power Hub fit my Rhino-Rack RLBS basket?
We will get it mounted and confirm the parts before you pay. We mount it with a sandwich plate set: plates above and below the mesh that the hub bolts through.
Do I need to cut or weld the basket?
No. The plates clamp the existing mesh, so the basket is not cut or welded.
