Skip to content
Kettle CustomsPROUDLY AUSTRALIANOWNED & OPERATED

Starlink Mini mount for a Rhino-Rack Heavy Duty bars

Yes, the Fan-Cooled Rooftop Power Hub mounts on a Rhino-Rack Heavy Duty bars. Mount the Power Hub on Rhino-Rack Heavy Duty (RB series) crossbars with M8 channel nuts.

How it mounts

The Power Hub's base has two rows of five M8 slots. On Heavy Duty bars the hub sits across the bars and bolts down into the wide top channel.

The Rhino-Rack Heavy Duty Bar Mounting Kit gives you four M8 channel nuts and four stainless flange bolts. Drop the nuts into the channel, set the hub over them and tighten each bolt with a 5 mm hex key.

The Power Hub's flat base is 334.5 x 260 mm, with two rows of five M8 slots to bolt through. The Starlink Mini sits inside the locked, fan-cooled housing.

Fitting it yourself is very doable. If you would rather have a professional job, or you are short on time, a Kettle Trusted Installer can fit the mount and the 12V wiring for you.

Common questions

Does the Starlink Mini Power Hub fit Rhino-Rack Heavy Duty bars?

Yes. The kit's M8 channel nuts sit in the bar's top channel and the Power Hub bolts down through its base slots.

Do I need drilling?

No. The hub bolts into the existing channel, so the bars are not drilled or modified.