Skip to content
Kettle CustomsPROUDLY AUSTRALIANOWNED & OPERATED

Starlink Mini mount for a Rhino-Rack Pioneer platform and tray (42100B to 42115B)

Yes, the Fan-Cooled Rooftop Power Hub mounts on a Rhino-Rack Pioneer platform and tray (42100B to 42115B). Mount the Power Hub on a Rhino-Rack Pioneer platform or tray with M8 channel nuts.

How it mounts

Pioneer platforms have channel slots in the tray. The Pioneer Tray Mounting Kit's M8 channel nuts feed in through the end slots, and the hub bolts down onto them.

Position the nuts under the hub's slots, set the hub down and tighten the four flange bolts.

The Power Hub's flat base is 334.5 x 260 mm, with two rows of five M8 slots to bolt through. The Starlink Mini sits inside the locked, fan-cooled housing.

Fitting it yourself is very doable. If you would rather have a professional job, or you are short on time, a Kettle Trusted Installer can fit the mount and the 12V wiring for you.

Common questions

Does the Starlink Mini Power Hub fit a Rhino-Rack Pioneer platform?

Yes. The Pioneer Tray Mounting Kit's M8 channel nuts feed in through the end slots of the tray.

Is the Pioneer 6 the same?

The Pioneer 6 and Reconn-Deck have drop-in slots and their own kit. See the Pioneer 6 page.