Skip to content
Kettle CustomsPROUDLY AUSTRALIANOWNED & OPERATED
Weekend Warrior Mount in Textured White holding a Starlink Mini, KC mark and Australian flag on the lock face

Australian made and trusted

Weekend Warrior Mount

for Starlink Mini

33% offSave $100.01

Now $199.99Was $300.00

Launch price

Simple. Tough. Locked to your roof. A low, lockable Starlink Mini mount cut, folded and finished right here in Australia, for people who want the job done properly without paying for features they will never use.

Colour

Power cable (optional)

Free shipping Australia wide.

The Starlink Mini, rack-specific channel nuts and optional magnetic feet are not included. Ask about fitment.

Want fan cooling and steady 30 V built in?See the Rooftop Power Hub for Starlink Mini

Who it is for

Made for the weekend.

For people who want their Mini on the roof for the trip and back inside after it. Nothing to wire in, nothing to maintain, and nothing you will not use.

Weekends away

Bolt the base to the rack once. Drop the dish in on Friday, lift it out on Sunday and take it inside. The base waits on the rack for next time.

No wiring job

Add the 5 m Power Lead and it runs from the car's 12 V socket. No drilling, no fuse box and no auto electrician.

Locked while you are away from it

A keylocking latch holds the drawer shut, so the dish stays put at the campsite or the pub car park.

Building a permanent touring setup with hardwired power? Tell us about your vehicle and we will point you to the right setup.

How it works

Drop it in. Push it shut. Locked.

The base bolts to a single rack slat and stays there. The dish drops in, the drawer pushes shut and the latch snaps locked on its own. The key only comes out to open it.

To lock

  1. 1Drop the dish in so it clicks home.
  2. 2Push the drawer shut. It snaps locked, no key needed.

To open

  1. 1Turn the key and pull the drawer back while the key is still turned.
  2. 2Release the key and lift the dish out.

Fitting

On the rack with one spanner.

  1. 1

    Bolt the base on

    Three M8 bolts on the centre line go through one rack slat, rail or crossbar channel. One 13 mm spanner, once.

  2. 2

    Open the drawer

    Turn the key and pull the drawer back while the key is still turned, then release the key.

  3. 3

    Drop the dish in

    Lower the Mini in until it clicks home.

  4. 4

    Push it shut

    Push the drawer shut and it snaps locked. No key needed to lock.

Will it fit my rack?

It needs one slat, rail or crossbar channel that takes an M8 bolt, which most platform racks and crossbars have. No rack? Two holes take 88 mm magnetic feet. Send us a photo of your rack and we will tell you exactly what you need.

Send us your rack

Why you will want one

Keylocking push-to-close latch

Push the drawer shut and the latch snaps locked on its own. The key is only needed to open it.

Shaped to the Starlink Mini

Cut and folded to the Mini's own shape, so there are no straps, no adhesive and no wobbling about.

Low and light

About 50 mm high and about 0.7 kg with its hardware.

Every bolt hidden when locked

Once the drawer is shut, there is no bolt left showing to undo.

One rack slat, 3 x M8

Three M8 fixings on the centre line land on a single slat, rail or crossbar channel. Optional 88 mm magnetic feet suit a roof with no rack.

Textured powder coat, KC mark cut through

Textured Black or Textured White powder coat, with the KC mark and Australian flag cut straight through. Laser cut, folded and coated in Somerville, Victoria.

Not a cheap import

There are plenty of throwaway plastic and stamped-steel mounts out there. This is not one. It is folded on our own press brake, powder coated in a textured finish, finished with stainless hardware and black nylon washers that keep the stainless off the aluminium, and every outside corner is radiused. The KC mark and Australian flag are cut straight through the metal. Basic by design, built properly.

Add-on

Add the 5 m Power Lead.

Add it and your power is sorted in one lead. Plug it into your 12 V socket and run it to the roof. A built-in voltage booster lifts the supply up to the 30 V your Starlink Mini needs, with a live volts and amps readout so you can see exactly what it is doing.

The plug end doubles as a car charger, with 2 USB-C PD and 2 USB-A ports, so your phone keeps charging while the dish runs.

  • 5 m of 18 AWG cable
  • Booster with live volts and amps display
  • 12 V cigarette plug with 2 USB-C PD and 2 USB-A ports
  • OEM Starlink Mini barrel plug with rubber boot
  • Velcro strap keeps the coil tidy
5 m Starlink Mini power lead with booster and car charger plug
Diagram of the 5 m power lead: voltage booster with live display, 12 V plug, USB-C PD and USB-A ports, Velcro strap, 5 m 18 AWG lead and Starlink Mini barrel plug
Booster display showing 30.0 volts
Live volts
Booster display showing live current in amps
Live amps
Lit USB-C PD and USB-A charging ports on the plug end
2 USB-C PD + 2 USB-A

In the box

  • Mount with the keylocking push-to-close latch fitted
  • Keys for the latch
  • 4 x M8 stainless hex head bolts, nylon washers and 316 nyloc nuts, fitted
  • 3 x M8 stainless hex head rack bolts with nylon washers
  • 5 m Power Lead, if you add it

Technical specifications

Compatibility
Starlink Mini
Material
Laser-cut and folded 3 mm aluminium
Weight
About 0.7 kg with hardware
Height
About 50 mm
Lock
Keylocking push-to-close latch; locks without the key, key to open
Mounting
3 x M8 on the centre line for a single slat or rail; 2 holes for 88 mm magnetic feet
Hardware
M8 stainless hex head bolts, 316 nyloc nuts, black nylon isolation washers; one 13 mm spanner
Power lead (optional)
5 m, 18 AWG, 12 V cigarette plug, built-in booster with live volts and amps display, 2 USB-C PD + 2 USB-A, OEM Starlink Mini barrel plug
Finishes
Textured Black or Textured White powder coat, KC mark and Australian flag cut through
Made
Somerville, Victoria

Questions

Is the Starlink Mini included?

No. The mount holds your own Starlink Mini. The dish is sold separately.

Will it fit my rack?

If your rack has a slat, rail or crossbar channel that takes an M8 bolt, it fits. The three fixings are on one line, so a single slat or rail is enough. For a roof with no rack, two holes take 88 mm magnetic feet. Not sure? Send us a photo of your rack and we will tell you exactly what you need.

What do I need to fit it?

A 13 mm spanner. The rack bolts and washers are in the box. Channel nuts for your particular rack and magnetic feet are not included.

How do I take the dish off?

Turn the key and pull the drawer back while the key is still turned, then release the key and lift the dish out. The base stays on the rack.

Do I need the Power Lead?

Only if you want to run the Mini from the car. It plugs into a 12 V socket and boosts the supply to the 30 V the Mini needs, with a live volts and amps display. If you already have a way to power your Mini, choose Mount only.

Can I charge my phone from the lead?

Yes. The plug end has 2 USB-C PD and 2 USB-A ports.

Where is it made?

Laser cut, folded and powder coated in-house in Somerville, Victoria.

Does shipping cost extra?

Shipping is free Australia wide.

Starlink is a trademark of Space Exploration Technologies Corp. Kettle Customs is not affiliated with or endorsed by SpaceX.

Weekend Warrior

$199.99 · Free shipping