Starlink Mini mount for a Rhino-Rack Pioneer 6 and Reconn-Deck
Yes, the Fan-Cooled Rooftop Power Hub mounts on a Rhino-Rack Pioneer 6 and Reconn-Deck. Mount the Power Hub on a Rhino-Rack Pioneer 6 or Reconn-Deck with drop-in M8 nuts.
How it mounts
Pioneer 6 slots take a drop-in nut, so there is no sliding from the end of the tray. The Pioneer 6 Channel Nut Kit has four drop-in M8 nuts, four stainless button head bolts and four nylon washers.
Drop the nuts into the slots under the hub's slot positions, set the hub on top and tighten.
The Power Hub's flat base is 334.5 x 260 mm, with two rows of five M8 slots to bolt through. The Starlink Mini sits inside the locked, fan-cooled housing.
Fitting it yourself is very doable. If you would rather have a professional job, or you are short on time, a Kettle Trusted Installer can fit the mount and the 12V wiring for you.
Common questions
Does the Starlink Mini Power Hub fit a Pioneer 6?
Yes. The Pioneer 6 Channel Nut Kit uses drop-in nuts made for the Pioneer 6 slots.
