Skip to content
Kettle CustomsPROUDLY AUSTRALIANOWNED & OPERATED

Starlink Mini mount for a steel mesh roof basket (any brand)

We will get the Fan-Cooled Rooftop Power Hub mounted on your steel mesh roof basket (any brand). Fit the Power Hub to any steel mesh roof basket with sandwich plates above and below the mesh.

How it mounts

Mesh baskets from any maker have no channel, so the hub mounts with sandwich plates. Two plates sit on top of the mesh and two sit underneath it. The Power Hub bolts through the mesh into the plates and clamps the basket floor between them.

The plates are 3 mm aluminium, cut and folded in our workshop. The basket is not cut, drilled out or welded. Fit it yourself or have a Kettle Trusted Installer do it.

The Power Hub's flat base is 334.5 x 260 mm, with two rows of five M8 slots to bolt through. The Starlink Mini sits inside the locked, fan-cooled housing.

The sandwich plate answer

Two aluminium plates go on top of the mesh and two go underneath. The Power Hub bolts down through the mesh into the plates, and the mesh floor is clamped between them. Nothing is cut or welded. Tell us at checkout or by email that you want the sandwich plates and we will add them to your order.

Want it confirmed before you order? Send us a photo of your rack and where you want the mount, and we will name the exact parts and have an order ready for you to pay. Send us a photo.

Fitting it yourself is very doable. If you would rather have a professional job, or you are short on time, a Kettle Trusted Installer can fit the mount and the 12V wiring for you.

Common questions

Can I mount a Starlink Mini on a mesh basket?

We will get it mounted and confirm the parts before you pay. A sandwich plate set clamps the mesh floor and the Power Hub bolts through it.

Will the dish see the sky from a basket?

Keep the hub the tallest thing on the roof. Starlink recommends a clear view of the sky, so keep loads and tents lower than the dish.