Skip to content
Kettle CustomsPROUDLY AUSTRALIANOWNED & OPERATED

Starlink Mini mount for a ARB steel mesh roof basket

We will get the Fan-Cooled Rooftop Power Hub mounted on your ARB steel mesh roof basket. The Power Hub fits an ARB steel mesh roof basket using sandwich plates above and below the mesh.

How it mounts

A mesh basket has no channel for a nut, so the hub bolts through the mesh into a set of sandwich plates: two on top of the mesh and two underneath, clamping the basket floor.

The plates are 3 mm aluminium made at our workshop. A Kettle Trusted Installer can fit it for you if you prefer.

The Power Hub's flat base is 334.5 x 260 mm, with two rows of five M8 slots to bolt through. The Starlink Mini sits inside the locked, fan-cooled housing.

The sandwich plate answer

Two aluminium plates go on top of the mesh and two go underneath. The Power Hub bolts down through the mesh into the plates, and the mesh floor is clamped between them. Nothing is cut or welded. Tell us at checkout or by email that you want the sandwich plates and we will add them to your order.

Want it confirmed before you order? Send us a photo of your rack and where you want the mount, and we will name the exact parts and have an order ready for you to pay. Send us a photo.

Fitting it yourself is very doable. If you would rather have a professional job, or you are short on time, a Kettle Trusted Installer can fit the mount and the 12V wiring for you.

Common questions

Will the Starlink Mini Power Hub fit my ARB basket?

We will get it mounted and confirm the parts before you pay. A sandwich plate set mounts it through the mesh without cutting the basket.