Skip to content
Kettle CustomsPROUDLY AUSTRALIANOWNED & OPERATED

Starlink Mini mount for a Front Runner Slimline II rack

Yes, the Fan-Cooled Rooftop Power Hub mounts on a Front Runner Slimline II rack. Mount the Power Hub on a Front Runner Slimline II tray with bolts that slide into the slat T-slot.

How it mounts

Slimline II slats have a T-slot. The Front Runner Slat Mounting Kit has four M8 stainless bolts that slide into the slat T-slot, with nylon washers and nyloc nuts that tighten inside the hub.

Slide the bolt heads into the slats at the hub's slot spacing, lower the hub over them and tighten.

The Power Hub's flat base is 334.5 x 260 mm, with two rows of five M8 slots to bolt through. The Starlink Mini sits inside the locked, fan-cooled housing.

Fitting it yourself is very doable. If you would rather have a professional job, or you are short on time, a Kettle Trusted Installer can fit the mount and the 12V wiring for you.

Common questions

Does the Starlink Mini Power Hub fit a Front Runner Slimline II?

Yes. The Slat Mounting Kit's bolts slide into the slat T-slot.