QUICK DOCK
Quick Dock Tilt Plate for Starlink Mini
Tent up. Dish level.
For wedge and clamshell rooftop tents. Driving, the Quick Dock sits flat on the lid, only 13mm higher than a normal dock. At camp, lift the dish off, undo two bolts, tilt the dock up on its hinge and drop the prop into the 25, 35 or 45 degree slot. Click the dish back on and it faces the sky while the lid is open.
Finish
Use with the cradle from a Quick Dock for Starlink Mini. Bolts to the tent lid's rails or crossbars with M8 T-bolts. Tell us your tent in the order notes.
Designed and made in Somerville, Victoria
Key features
Tent up. Dish level.
Nothing to wear out
A 316 stainless piano hinge and a laser-cut aluminium prop. No gas struts, no springs.
Locked for the road
Shut, two M8 bolts hold the dock down through its own slots, under the locked dish where nobody can reach them.
The Quick Dock built in
The tilt deck is a Mini Quick Dock with the same four studs as the rest of your Kettle docks, so your locking cradle clicks on and locks with its usual key.
- Tilts the dock up to 25, 35 or 45 degrees at camp
- Sits flat for driving, only 13mm higher than a normal dock
- 316 stainless piano hinge and a laser-cut aluminium prop, no gas struts or springs
- Two M8 bolts hold it shut for the road, under the locked dish
- The tilt deck is a Mini Quick Dock with the same four studs, so your locking cradle clicks on and locks
- Bolts to the tent lid's rails or crossbars with M8 T-bolts
Tech specs
What it is made of, and what it fits.
Quick Dock Tilt Plate for Starlink Mini
- Works with
- The cradle from a Quick Dock for Starlink Mini (sold separately)
- Tent
- Wedge and clamshell rooftop tents, on the lid's rails or crossbars
- Tilt
- 25, 35 or 45 degrees, set by the prop
- Driving
- Flat on the lid, 13mm higher than a normal Quick Dock
- Hinge
- 316 stainless piano hinge with a laser-cut aluminium prop
- Hardware
- M8 T-bolts to the lid; two M8 bolts hold it shut
- Finish
- Textured Black or Textured White
- Made in
- Somerville, Victoria
Fitment
- Fits
- The cradle from a Quick Dock for Starlink Mini (sold separately), Wedge and clamshell rooftop tents with rails or crossbars on the lid
- Does not fit
- Starlink Gen 3 Standard dishes (use the Quick Dock Tilt Plate for Starlink Gen 3 Standard), Starlink Gen 3 Performance dishes (use the Quick Dock Tilt Plate for Starlink Gen 3 Performance)
Bolts to the tent lid's rails or crossbars with M8 T-bolts. Tell us your tent in the order notes.
The Quick Dock range
One cradle. Every place.
Fit a dock to the roof, the caravan ladder or the boat rail, and a Camp Stand for camp. Your dish clicks between them in seconds and locks on every one.
See the whole rangeStarlink is a trademark of SpaceX. This product is made by Kettle Customs and is not affiliated with or endorsed by SpaceX.