Skip to content
Kettle CustomsPROUDLY AUSTRALIANOWNED & OPERATED
Quick Dock Tent Bridge on a hard-shell rooftop tent

QUICK DOCK

Coming soon

Quick Dock Tent Bridge

Your tent. Your signal.

Put the Quick Dock on top of your hard-shell rooftop tent. Two folded aluminium bars span the lid's T-slot rails and carry the dock in the middle, so the dish is the highest thing on the vehicle and the lid still closes with it on.

Finish

Not on sale just yet. Leave your email and we will let you know the day it is.

Use with any Kettle Quick Dock (sold separately). Supplied with 4 x M8 T-bolts to suit 8mm rail slots; tell us your tent or crossbars in the order notes if yours differ.

Australian National Flag Designed and made in Somerville, Victoria

Key features

Your tent. Your signal.

Fits most hard shells

Long slots at each end take M8 T-bolts in rails anywhere from 690 to 1110mm apart.

Or two crossbars

No tent? The same bars span two T-slot roof crossbars 690 to 1110mm apart and put the dock between them.

Every Quick Dock

The bars carry rivnuts for the Mini, Gen 3 Standard and Gen 3 Performance Quick Docks. Change dishes, keep the bridge.

Low profile

25mm bars keep the Mini's face about 70mm above the lid.

Bolts under the dish

The dock bolts through its own slots into rivnuts in the bars, all covered once the dish is locked on.

  • Two folded aluminium bars that span the lid's T-slot rails
  • Long end slots take M8 T-bolts in rails 690 to 1110mm apart
  • Or span two T-slot roof crossbars 690 to 1110mm apart
  • Rivnuts for the Mini, Gen 3 Standard and Gen 3 Performance Quick Docks
  • 25mm bars keep the Mini's face about 70mm above the lid
  • The dock bolts into rivnuts in the bars, covered once the dish is locked on
  • Supplied with 4 x M8 T-bolts to suit 8mm rail slots

Tech specs

What it is made of, and what it fits.

Quick Dock Tent Bridge

Works with
Any Kettle Quick Dock: Mini, Gen 3 Standard or Gen 3 Performance (sold separately)
Tent
Hard-shell rooftop tent lids with T-slot rails 690 to 1110mm apart
Crossbars
Two T-slot roof crossbars, 690 to 1110mm apart
Construction
Two folded aluminium bars, 25mm high, with rivnuts for the dock
Height
Mini's dish face about 70mm above the lid
Hardware
4 x M8 T-bolts to suit 8mm rail slots
Finish
Textured Black or Textured White
Made in
Somerville, Victoria

Fitment

Fits
The Quick Dock for Starlink Mini (sold separately), The Quick Dock for Starlink Gen 3 Standard (sold separately), The Quick Dock for Starlink Gen 3 Performance (sold separately), Hard-shell rooftop tents with T-slot rails on the lid, 690 to 1110mm apart, Two T-slot roof crossbars, 690 to 1110mm apart
Does not fit
Tents without T-slot rails on the lid, and roofs without T-slot crossbars, Rails or crossbars under 690mm or over 1110mm apart

Supplied T-bolts suit 8mm rail slots. If yours differ, tell us your tent or crossbars in the order notes.

The Quick Dock range

One cradle. Every place.

Fit a dock to the roof, the caravan ladder or the boat rail, and a Camp Stand for camp. Your dish clicks between them in seconds and locks on every one.

See the whole range

Starlink is a trademark of SpaceX. This product is made by Kettle Customs and is not affiliated with or endorsed by SpaceX.